MORECARE HIGH pH ADJUSTER
DESCRIPTIONMoreCare high pH adjuster is a pH regulator for swimming pools. It helps reduce the pH level thus increasing chorine’s stability and discourages rusting on metal plumbing and leeching of ceramic tiles.
Add a ½ Kg per 100,000 litres of pool water daily when your pH is above 7.0.
Maintain your pool water pH at 7.2 – 7.6 If the pool water reduces to pH7.8, add the low pH adjuster immediately. Add a measure of the pH adjuster to water in bucket then add to pool. Circulate the water for about 8 hours, test and repeat as necessary.
- Wear rubber gloves and eye protection
- Keep out of reach of children
- Do not orally ingest
- Store in a cool dry place, away from flammable materials
- Do not mix with other chemicals
HANDLING & STORAGE:
MoreCare pH adjuster is suitable for use in adjusting high levels in swimming pools. The product is slightly basic, not corrosive user friendly, but in common with all chemicals, prolonged contact with the skin should be avoided; use of rubber gloves is recommended.
Do not mix with other chemicals unless recommended.
Wear appropriate safety gear clothing, do not eat or smoke whilst handling the product.
Shelf life of at least 48 months
Store in a cool dry environment and away from direct sunlight.
Re-seal /Stopper original containers tightly when not in use, do not return dispensed MoreCare pH adjuster into original container
Sulphates, Sanitizers, Phosphates, carbonates & sequesetrants
Available Pack sizes: 5 kg, 10Kg 20 kg, 50kg